top of page

LICHT2000

Dampfbad

made of eloxated aluminium sealed with transparent 2-component resin warmwhite SMD-LED`s

LED = Nichia NSFL5GT-V1
max. -20° bis +80° Celsius
1083 Lumen
24 Volt / 6,46 Watt

RGB SMD-LED`s
LED= Osram RGB-PLCC.6 SMD
max. -20° bis +80° Celsius
24 Volt / 13,66 Watt

L= 395 mm
B= 220 mm
cutout dimensions witout built-in pot
L= 370 mm
B= 200 mm
T= 50 mm
including 4 qty. 3M gel plugs
cable 2000 mm
IP 65
without built-in pot

equipment:
installation pot 63.14.60000.GFK
with PG screwing for the cable gland
L= 375 mm
B= 200 mm
T= 60 mm
with a circulation flange, width 15 mm

Aquila

Einbauleuchte

Housing made of aluminum painted black
with glass cover
1 x 500mA 2 watts.,
2,700 degrees Kelvin
CRI>90
Beam angle 40
with a neoprene cable approx. 1,000 mm
DA= 23mm
ET = 78 mm
Weight: 82g

with open strands. If several beams are used, they must be connected in series

IP67
Made in Italy

equipments:
Recessed sleeve for recessed spotlight with glass black-13.26.A00161.40
Aluminum mounting sleeve black with flange
OD= 30mm
ET= 96 mm
Bore= 25.60mm

Black Eye

Einbaustrahler mit asymetrischer Linse schwarz

Housing made of aluminum painted black
with glass cover
1 x 500mA 2 watts.,
2,700 degrees Kelvin
CRI>90
Beam angle 30°
with a neoprene cable approx. 1,000 mm
OD= 35mm
DA= 30 mm
ET= 65 mm
Weight: 82g

with open strands. If several beams are used, they must be connected in series

IP67
Made in Italy

equipments:
Recessed sleeve for recessed spotlight with glass black-13.26.A00161.40
Aluminum mounting sleeve black with flange
OD= 30mm
ET= 96 mm
Bore= 25.60mm

Black Eye

Einbaustrahler mit asymetrischer Linse schwarz

wall armature consists of 2mm inox covers (1.4571)
B= 300 mm
H= 380 mm
wall clerance: 50 mm
sealed with transparent 2-component resin

warm white SMD- LEDs
lenght LED`s = 912 mm
12 Volt / 8,76 Watt
LED= Nichia NSFL5GT-V1
per linear metre 1083 lumen
min. -20°C max. +80°C
with 250 mm cable

SMD-RGB LEDs
lenght LED`s = 860 mm
12 Volt / 16,70 Watt
LED= Osram RGB-PLCC.6 SMD
min. -20°C max. +80°C
with 250 mm cable

cable take place on the part of the building site
including Paguro-gel plug
IP65

Ceramica

Wandleuchte

for LED 35 mm
with inox ring and
4 inox screws
Ø= 40 mm
L= 72 mm

for LED 85 mm
with inox ring and
4 inox screws
with inner O-ring
Ø= 92 mm
L= 72 mm
Made in IItaly

Einbautopf für LED Unterwasserstrahler

installation pot for led underwater spotlight

without built-in pot
AD= 85 mm
ET= 120 mm
totally sealed
500mA/3 x 2W*
IP 68

*for every spotlight except for RGB: 350mA / 3 x 1W
Made in Italy

LED Unterwasserstrahler V2A groß

LED underwater spotlight V2A big

without built-in pot
AD= 35 x 35 mm
ET= 52 mm
totally sealed
500mA/2W
IP 68

Made in Italy

LED Unterwasserstrahler V2A groß quadratisch

LED underwater spotlight V2A large square

underwater spotlight small

without built-in pot
AD= 35 mm
ET= 52 mm
totally sealed
500mA/2W
IP 68

Made in Italy

LED Unterwasserstrahler V2A klein

LED underwater spotlight V2A small

without built-in pot
AD= 85 mm
ET= 120 mm
totally sealed
500mA/3 x 2W*
IP 67

*for every spotlight except for RGB: 350mA/3 x 1W

Made in Italy

LED Unterwasserstrahler V2A klein quadratisch

LED underwater spotlight V2A small squar

sealed with transparent 2-component resin
Power RGB LED P5II
3 x 350 mA
each with cable red, greed, blue = rot,green,blue = minus
each with cable red/white, greed/white, blue/white = plus
and a cable black for looping through
lenght cable ca. 350 mm
AMP plugs
AD= 42 mm
DA= 32 mm
ET= 66 mm
when several spotlighs are installed, it is necessary
to connect it in series!
Attention! It is absolutely essential to installation the completely LED system, after than it is allowed to conected to the power supply.

IP65
without built-in pot

equipments:

Stainless steel mounting sleeve-63.213.V2A.EBT.IP65
for the installation of the Luminosa to tile floor
ET: 42 mm
for tile fitting up to 20 mm
flange =100 x 100 mm
IP65

Acid-resistant installation sleeve with nut– 63.213.V2A.EBH.IP65
with lock nut
L= 98,50 mm
bore 34 mm

Luminosa

Edelstahstrahler mit RGB

bottom of page